The GEOSATpro SL2 Bullet LNBF is the smallest two output Ku-band LNBF available in the world! GEOSATpro technicians incorporated the latest in microelectronic technology to design and produce this innovative high performance twin LNBF. Independent isolated outputs prevent interference between multiple receivers. The small bullet size housing will not compromise signal reception. You will not find a higher performance FSS LNBF anywhere.

    * Replaces a single output LNBF for installation support of 2 or more receivers
    * Watch different channels from the same satellite dish on 2 different receivers
    * Compatible with DVBS, FTA, MPEG, DCII and Analog satellite receivers
    * Stable frequency and low noise 0.4 NR for the very best reception in fringe signal areas
    * Twin F-type coax outputs for direct connection with 1 or 2 satellite boxes
    * Connect to a standard 3x4 multi-switch, 22KHz or DiSEqC type multi-switch for multiple receiver connections (3 or more receivers)
    * 40mm standard size FSS satellite dish LNBF mount
    * Allows 3 - 4 degree reception of multiple satellite dishes
    * Perfect for adding additional rooms for a Glorystar System


     

    

        

            

            
RF Input
            
            
 
        
        


            
I/P Frequency Range 
            
11.7 ~ 12.75GHz 
        
        

            
 
            
 
        
        


            
IF Input
            
 
        
        

            
L.O. Frequency
            
10.75GHz
        

        

            
O/P Frequency
            
950 ~ 2000MHz
        
        

            
L.O. Stability
            
+/-3MHz (-40°C ~ +60°C) 

        
        

            
L.O. Phase Noise
            
<-50 dBc @ 1KHz offset
 <-80 dBc @ 10KHz offset
 <-95 dBc @ 100KHz offset
        
        


            
 
            

       
        
        

            
Output
            
75 ohms F-female type connector
        

        

            
 
            
 
        
        

            
Conversion Performance @ 25°C
            
 

        
        

            
Noise Figure 
            
0.4dB (Typ)
        
        

            
Cross Polarization 

            
25dB (Typ)
        
        

            
Image Rejection
            
40dB (Min)
        
        


            
Output VSWR
            
2.0:1
        
        

            
Conversion Gain
            
60dB (Typ)
        

        

            
Gain Flatness
            
+/-0.5dB / 26 MHz, 8dB over each IF band
        
        

            
Output Spurious
            
<-60dBm

        
        

            
 
            
 
        
        

            
Power Requirements  
            
 

        
        

            
Current Consumption 
            
170mA (200 mA Max)
        
        

            
Operating Voltage 

            
Vertical: 10.5 – 14.0 VDC 
       Horizontal: 16.0 – 20.0 VDC
        
        

            
 
            
 

        
        

            
Environmental
            
 
        
        

            
Working temp/humidity
            
-30°C ~ +60°C  0 ~100%

        
        

            
Mount Diameter
            
40mm 
        
        

            
Length

            
5 inches  (12.5mm)
        
        

            
Weight
            
4.1 ounces  (116.2 grams)