The WaveFocus Wireless USB Adapter for AzBox HD receivers allows you to enable wireless connectivity for your AzBox Elite, Ultra, Me (*) or miniMe (*) without any special software or drivers.

This is a true wireless adapter and not a bridge so you will be able to connect to wireless networks directly from the AzBox user interface as if you had a Premium or Premium Plus model. Wireless B, G and N networks are supported with a maximum speed of 150 Mbps.

(*) Me or miniMe requires version 1.85 or later of AZtrino North American edition in order to operate.

SPECIFICATIONS
Interface: USB 2.0 / 1.1
Frequency Range: 2.4 GHz
Wireless Transmit Power: < 15dBm ± 2dB
Wireless: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n(Draft 2.0)
Power: USB Bus-Power
Modulation Type: OFDM, CCK, BPSK, QPSK
Receiver Sensitivity: 
-78dBm in 150Mbps (54Mbps)
-93dBm in 30Mbps (6Mbps) 
Security: 64/128-bit WEP (Open), 64/128-bit WEP (Shared), WPA TKIP, WPA2 TKIP, WPA AES, WPA2 AES
Data Rate:
- 802.11b = 11, 5.5, 2, 1 Mbps
- 802.11g = 54, 48, 36, 24, 18, 9, 6 Mbps
- 802.11n =  150, 135, 120, 90, 60, 45, 30, 150, 144.4, 130, 115.6, 86.7, 57.8, 43.3, 28.9, 14.4 Mbps
LED: Link /ACT
Antenna: 2dBi (SMA type)
Operating Temperature: 0 ~ 50c
Relative Humidity: 10 ~ 75%, non-condensing
Dimension (W x D x H): 85.8 x 25.2 x 10 mm